2014 AP Physics C物理C—Mechanics力學真題系列之簡答題免費下載

歷年AP Physics物理學系列

真題與答案下載

翰林國際教育全網首發

力爭超快速發布最全資料

助你在升學路上一帆風順

為你的未來保駕護航

2014 AP Physics C Mechanics Free-Response Questions Free Download

2014 AP 物理C力學簡答題部分免費下載

此套題僅 p II含有簡答題，

共計時45分鐘，共3題

占總分50%

每道大題可能含有不同數量的小題

可以使用計算器

部分真題預覽：

1）In an experiment, a student wishes to use a spring to accelerate a cart along a horizontal, level track. The spring is attached to the left end of the track, as shown in the figure above, and produces a nonlinear restoring force of magnitude F_S = As² + Bs?, where s is the distance the spring is compressed, in meters. A measuring tape, marked in centimeters, is attached to the side of the track. The student places five photogates on the track at the locations shown.

1. Derive an expression for the potential energy U as a function of the compression s. Express your answer in terms of A, B, s, and fundamental constants, as appropriate.
   In a preliminary experiment, the student pushes the cart of mass 0.3kg into the spring, compressing the spring 0.040m . For this spring, A= 200 N/m² and B=150 N/m. The cart is released from rest. Assume friction and air resistance are negligible only during the short time interval when the spring is accelerating the cart.
2. Calculate the following:
   1. The speed of the cart immediately after it loses contact with the spring
   2. The impulse given to the cart by the spring
      In a second experiment, the student collects data using the photogates. Each photogate measures the speed of the cart as it passes through the gate. The student calculates a spring compression that should give the cart a speed of 0.320 ms after the cart loses contact with the spring. The student runs the experiment by pushing the cart into the spring, compressing the spring the calculated distance, and releasing the cart. The speeds are measured with a precision of ±0.002 m/s. The positions are measured with a precision of?±0.005m.
3. On the axes below, plot the data points for the speed v of the cart as a function of position x. Clearly scale and label all axes, as appropriate.
4. 1. Compare the speed of the cart measured by photogate 1 to the predicted value of the speed of the cart just after it loses contact with the spring. List a physical source of error that could account for the difference.
   2. From the measured speed values of the cart as it rolls down the track, give a physical explanation for any trend you observe.